Care And Maintenance - Dyna-Glo SIGNATURE Serie Manuel D'instructions

CARE AND MAINTENANCE

AFTER USE SAFETY AND MAINTENANCE
WARNING
• Use caution when lifting and moving the unit to avoid strain injuries.
• DO NOT store the unit near gasoline or other combustible liquids or where combustible vapors
may be present. Keep the area around the appliance clear and free of combustible materials
and vapors.
• DO NOT store this appliance in an area accessible to children or pets. Store the appliance in a dry,
protected location.
• DO NOT allow anyone to conduct activities around the appliance following use until it has cooled.
It is hot during operation and remains hot for a period of time following use.
• DO NOT leave hot ashes unattended until the appliance cools completely.
• The grill and offset smoker box becomes extremely hot – allow the appliance to cool completely
before handling. Allow the grill and offset smoker box to cool before removing and
cleaning the grease cup.
• Dispose of cold ashes by wrapping them in heavy-duty aluminum foil and putting them in a
noncombustible container.
• If you must dispose of the ashes in less time than it takes for them to completely cool, remove the
ashes using heat-resistant gloves, along with Dyna Glo ash scoop (if equipped), metal tongs, or fire
place shovel. Place the ashes in aluminum foil. Completely soak the ashes with water before
disposing of them in a noncombustible container.
CAUTION: All care and maintenance procedures are to be performed while the
unit is completely cooled. Always perform maintenance by a qualified service person.
Clean the cooking grates with hot, soapy water. Rinse and dry thoroughly. You may prefer to coat the
cooking grates lightly with cooking oil or cooking spray.
To clean the inside and outside of the unit, simply use a damp cloth. Spray-washing with a water
hose is not recommended. Moisture should be wiped away and not allowed to stand inside or on top
of the unit. Once cleaned, you may prefer to lightly coat the interior of the firebox with cooking oil
or cooking spray.
If rust is present on the exterior surface of the unit, clean the area with steel wool or
emery cloth and use heavy-duty, heat-resistant paint.
NEVER apply additional paint to the interior of the unit. If rust is present on the interior of the unit,
clean it thoroughly with steel wool or emery cloth and lightly coat the area with cooking oil or cooking
spray to help minimize recurring rust.
To protect your unit from weather conditions, always keep it covered while not in use.
21