JANE MATRIX LIGHT 2 Mode D'emploi page 28

Masquer les pouces Voir aussi pour MATRIX LIGHT 2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
3 Placing the baby in the safety seat
3a -
Unfasten the buckle.
3b -
Loosen the harness by pulling the shoulder straps while pressing
the tightening button.
3c -
Place the baby in the safety seat, ensuring that they are sitting
well back and that their back is straight. Join the top ends of the
buckles.
3d -
Insert them in the central lock and press until you hear a click.
3e -
Tighten the shoulder straps and pull on the tightening strap.
4 Using your MATRIX LIGHT in a pushchair
MATRIX LIGHT can be anchored on any JANÉ chassis that has the PRO-
FIX system.
4a -
To fasten the safety seat onto a chassis, insert the connectors into
the slots on the chassis and press until they click.
To release your MATRIX LIGHT from the chassis, press the catches
4b -
on the handle and pull the seat upwards.
28
IM-1452.07 MATRIX LIGHT2 ESP_27_6_16.indd 28
WARNING
DO NOT use with a two anchoring point belt.
Not all safety systems are exactly the same, so we advise that you
check your MATRIX LIGHT in the car in which it is going to be fitted.
It is very important not to use second-hand products, as JANÉ can
only guarantee complete safety with items used by their first buyer.
Never leave the baby on their own.
Always remember to carry your baby with the safety harnesses co-
rrectly buckled.
For your baby's proper development, we advise you not to over-use
the carry cot in the seated position on long journeys, letting the
baby rest in the reclining position (for babies up to 10 Kg).
Any alteration or addition to the device without proper authori-
sation from JANÉ may seriously alter the safety of the retaining
system.
Failure to follow the instructions carefully for the correct use of
the retaining system may be dangerous for the safety of the baby.
This safety device must not be used without the upholstery or the
mattress pad, or be used with others that are not the originals, as
they form an integral part of the safety features of the system.
Check that the seat has been positioned correctly.
24/10/16 12:28

Publicité

Table des Matières
loading

Table des Matières