Publicité
Les langues disponibles
Les langues disponibles
Congratulations on purchasing
your »signolux plug-in receiver«.
We hope it will give you many
years of reassuring operation.
You have purchased a modern
and reliable system.
Please read these operating
instructions carefully. They tell
you how to set up the system
correctly and explain all the sys-
tem's features.
Package contents
Please check if all of the follo-
wing components are included:
- »signolux plug-in receiver«
- manual
- warranty card
If any parts are missing, please
immediately contact your dealer
or the manufacturer directly.
Function
The »signolux plug-in receiver«
is a receiver for the signals of
the various »signolux« transmit-
ters and indicates these as vi-
sible flashing light signals.
6 indicator LEDs with symbols
help to distinguish the signal
source.
Signals and controls
Indicator-LEDs:
The 6 indicator-LEDs help to
distinguish between the various
signal sources. They light up for
40 seconds after an incoming
signal.
Transmitter battery status in-
dicator:
The receiver informs about
the state of the batteries of the
transmitters:
- A low battery level of a trans-
mitter is indicated by the red
control lamp shining together
with the symbol of the accor-
ding transmitter when it's sig-
nal is triggered.
Please replace the batteries
of the according transmitter as
soon as possible.
Function button:
When the »signolux plug-in
receiver« is flashing, you can
cancel the signal by pressing
the function button.
Press it again to recall the last
received signal.
The function button is also used
to program the receiver (see
section 2 „Programming sig-
nals").
English 11
Publicité
