Important; Description; Technical Data - Cooper Hand Tools Weller WMRS Mode D'emploi

English
Thank you for placing your trust in our company by purcha-
sing the Weller Soldering Station WMRS. Production was
based on stringent quality requirements which guarantee the
perfect operation of the device.

1. Important!

Please read these Operating Instructions and the attached
safety information carefully prior to initial operation. Failure to
observe the safety regulations results in a risk to life and
limb.
The manufacturer shall not be liable for damage resulting
from misuse of the machine or unauthorised alterations.
The Weller WMRS Soldering Station corresponds to the EC
Declaration of Conformity in accordance with the basic safety
requirements of Directives 89/336/EEC and 73/23EEC.

2. Description

2.1 Control unit
The microprocessor-controlled soldering station WMRS is
part of a generation of devices which were developed for
industrial production technology, including repair and labora-
tory areas. Digital control electronics and high-quality sensor
and heat transmission technology in the soldering tool gua-
rantee precise temperature control behaviour at the soldering
tip. Top temperature accuracy and optimised, dynamic tem-
perature behaviour when under stress is achieved by fast and
precise measured value recording in the closed control loop.
The soldering tools themselves are recognised automatically
by the WMRS and the corresponding control parameters
assigned. Various potential balancing options for the solde-
ring tip, a zero voltage circuit and an antistatic design of the
control unit and iron add to the high quality standard. The
option of connecting an external input device extends the
functional diversification of this soldering station. With the
input device WCB 2, available as an option, time and locking
functions can be implemented, among other things. An inte

Technical data

Dimensions in mm:
Mains voltage (12):
Power input:
Protection class:
Fuse (13):
Temperature control:
Accuracy:
Potential balance (11):
17
grated temperature measuring device and PC interface
belong to the extended scope of the WCB 2 input device. The
desired temperature can be set in a range from 50°C - 450°C
(150°F - 850°F) via 2 buttons (Up / Down). Specified and
actual value are displayed digitally. When the preselected
temperature has been reached, this is indicated by a red flas-
hing LED in the display, which serves as a visual control
check. When lit up permanently, this indicates that the
system is heating up. When placing the WMRP soldering iron
in its holder, temperature cut-out is activated. This reduces
oxidation of the soldering tip during long
soldering pauses. Due to the extremely fast heating-up time,
the WMRP soldering iron is operational again directly after
removal from the holder.
2.2. Soldering iron
WMRP:
WSP 80:
MPR 80:
166 X 115 X 101 (L X W X H )
230V 50/60Hz
120V 60Hz
95 W
1 control unit ; 3 soldering iron
T500mA
50 °C – 450 °C (150 °F – 850 °F)
± 9°C
State upon delivery: hard grounded, plug is not inserted
Extremely powerful 40W fine soldering iron with
integrated heating system in the soldering tip.
Thanks to a plug-in system, the soldering tip can
be changed without tools. The soldering tip tem
perature is reached rapidly and adjusted exactly.
Thanks to a sensor system installed in the hand
le, the soldering iron is cut out automatically
when it is set down.
The soldering iron WSP 80 is characterised by
fast and precise achievement of the soldering
temperature. Thanks to its slim design and a
heating output of 80 W, universal application is
possible, from extremely fine soldering tasks to
those which require high temperatures. Work can
continue directly after a soldering tip change
because the service temperature is reached
again in a very short time.
The Weller Peritronic MPR 80 is a soldering iron
with an adjustable working angle of 40°. This
makes individual organisation of the soldering
process possible with regard to ergonomics. Its