Velleman RETRO Serie Mode D'emploi page 2

5. Security Prescriptions
• Make sure that the voltage supply does not exceed the rated value.
• Do not deactivate the device within 50ms after its activation in order to avoid damage.
• Keep the cables well clear of other current-carrying conductors in order to avoid the creation of magnetic fields which
may cause interference.
• Do not install the sensor where it is exposed to fluorescent lamps with rapid-starters or high-frequency starters.
• Do not expose the device to dust, water, dirt or oil and protect it from vibrations or shocks to prevent malfunction.
6. Dimensions = Afmetingen
Reflector / Réflecteur Bracket / Beugel / Etrier Bracket / Beugel / Etrier + PEM5D
51 x 61 x 8mm
The information in this manual is subject to change without prior notice.
PEM5D
- 2 - VELLEMAN