Description Of The Electro-Hydraulic Pumping Unit; Description Of Components; Brief Description Of The Important Features Of The Unit - Emerson Klauke AHP 700-L Mode D'emploi

Instruction Manual Battery-hydraulic Pump
AHP 700-L
3.

Description of the electro-hydraulic pumping unit

3.1 Description of the components
The electro-hydraulic pumping unit consists of the following components:
Table 3 (see pic.1)
Pos. Description
1 Battery (RAL40/BL1840)
2 battery lock
3 Emergency stop button
4 Compartment
5 Male plug
6 Socket
7 Oil plug
8 Program selection switch
9 OLED Display
10 LED (red)
11 Forward and return keys

3.2 Brief description of the important features of the unit

The unit is equipped with a special brake which stops the forward motion of the piston/dies when the trigger is re-
leased.
Through an optional USB adapter a report can be generated at the end of a working session at a PC documenting
the proper function of the unit.
Abb. ähnlich / pic. similar
WORK
HE.14138_H © 09/2011
Function
rechargeable 4Ah Li-Ion battery (RAL40/BL1840)
Optional: mains adapter NG2230
Slide to unlock the battery
To reset the crimping, cutting and punching tools into the starting
position in case of an error.
~ e.g. for remote control and/or carrying belt
Male plug to connect to a female plug on the hose
for remote control, safety foot switch, two hand control and other
controls
Oil plug with inspection glass for the hydraulic oil
Turning knob for the selection of special programs for crimping,
cutting, punching as well as a position to read out data.
High tech organic display to indicate tool and crimping/cutting data
Indicator for Battery charge, Service Intervals and faults
To start/stop the working cycle
SERVICE DON´T DO
General
safety rules
GB
3