Power Fist 8843633 Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

V1.0
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is dangerous
and can cause an injury. A qualified technician must repair and verify
the power tool is operating correctly before it can be used.
4.
Never use a tool with a cracked or worn tool accessory. Change the
tool accessory before using it.
6.
Do not cover the air vents.
7.
Only use accessories that are specifically designed for use with the
tool. Ensure the accessory is tightly installed.
8.
Only use an accessory that exceeds the Blows Per Minute rating (see
Specifications).
9.
Disconnect the power source before installing or servicing the tool.
10. Remove adjusting keys and wrenches before using the tool. The tool
may eject an attached wrench or a key and cause an injury to you or a
bystander.
11.
Before using the tool on a workpiece, test the tool by running it at the
highest speed rating for at least 30 seconds in a safe position. Stop
immediately if there is any abnormal vibration or wobbling. Check the
tool to determine the cause.
12. Never force the tool. Excessive pressure could break the tool, resulting
in damage to your workpiece or serious personal injury. Excessive
pressure is the cause if your tool runs smoothly under no load, but
roughly under load.
13. Keep hands and fingers away from the work area. Any part of the body
contacting the tool's working parts could result in an injury.
14. Never touch the tool accessory or workpiece during or immediately after
use. They may be hot and could inflict a burn injury.
Visit www.princessauto.com for more information
Air Scraper Tool Kit
8843633
5

Publicité

Table des Matières
loading

Table des Matières