GreenWorks 12A BLOWER Manuel Du Propriétaire page 11

ASSEMBLY INSTRUCTION
ATTACHING AND REMOVING THE COLLECTION BAG (Fig. 3)
CAUTION:
Do not use the product in vacuum/suction mode without the collection bag fully assembled and
properly attached to the unit.
- Align the front part of the plastic bracket on the collection bag with the discharge outlet of the blower
vac (on the tube side).
- Align and push the bag connector on the rear side into the discharge outlet of the blower vac until
it clicks into place.
- Clip in the front bag hook.
- To remove the collection bag, Push the bag connector handle down and pull the collection bag
away from the product.
Rear side
Fig.3
11