Before First Use; Heating Water; Cleaning And Maintenance - Melitta Prime Aqua Mode D'emploi

the lid. Do not open the lid
when heating water.
• Parts of the kettle become very
GB
hot when it is in use. Avoid contact
with these parts and with hot
steam.
• Never immerse the kettle in
water.
• Remove the kettle from the
electric socket when it is not
being used for a longer period.
• This appliance can be used by
children who are 8 years old
or over, if they are supervised
or have been instructed in the
safe use of the appliance and
have understood the dangers
associated with it. Cleaning and
maintenance of the appliance
should not be undertaken by
children unless they are 8 years
old or over and are supervised.
The appliance and power cable
should be kept away from children
under 8 years old.
• The appliance can be used by
people with limited physical,
sensory or mental capacities or
limited experience and/or know-
ledge, if they are supervised or
have been instructed in the safe
use of the appliance and have
understood the dangers associated
with it.
• Children must not play with the
kettle.
• Replacing the power cable and any
other repairs should only be carried
out by the Melitta
service or by an authorised repair
workshop.
6
customer
®

2. Before first use

• Ensure that the power supply in your home
corresponds to that on the model plate on the
base of the appliance.
• Connect the base unit to a power source. Unused
cable can be stored in the base of the appliance .
• All kettles have been tested during production to
ensure they work perfectly. Therefore there may be
remaining water deposits. Clean the appliance before
use by boiling the maximum amount of water twice.

3. Heating water

• Ensure that the kettle is connected to a power
supply.
• Open the lid . The lid is not detachable.
• Fill the kettle with the desired amount of cold water.
With the help of the level markers  on the handle
you can measure the desired amount of water.
• Never use the kettle without water, fill it with at
least 0.75 litres of water (see level markers).
• Never fill the kettle above the 'max' level.
• Close the lid.
• Put the kettle on the base unit.
• Turn the kettle on . The switch  lights up
showing that the kettle has begun to heat.
• You can stop the kettle heating at any time by using
the switch or lifting the kettle from the base unit.
Run dry protection
The heating element is equipped with over heating
protection. If you accidentally turn on the kettle
without water, or if the water boils dry (e.g. if the lid
is not closed), dry run protection means the kettle
will switch off automatically. Allow the kettle to cool
before filling with water again.
Limescale filter
The limescale filter in the outlet holds back limescale
or other large particles.

4. Cleaning and maintenance

Before cleaning always remove the appliance from
the power source.
External cleaning
• Do not clean the kettle or the base unit under
running water.
• The kettle and the base unit can both be cleaned
with a soft damp cloth.
• Do not use harsh or abrasive cleaning agents.
Descaling
Limescale deposits in the kettle are unavoidable.
Heavy calcification increases the amount of energy the
appliance uses, as the limescale prevents the optimal
transfer of heat energy to the water. To prevent
damage and to ensure the best transfer of energy the
kettle must be regularly descaled. To descale we
recommend using Melitta "Anti Calc Liquid for Filter
®
Coffee & Aqua Machines". Use the descaler following
the instructions on the pack. After descaling you must
boil the maximum amount of clean water 2-3 times to
remove residue of the descaler.