LUND 900122 Instructions D'installation page 4

Installation Steps
Vehicle Equipped with Utility Tracks
For ease of installation the side rails have
been marked with the clamp locations.
Note: Remove upper clamps and hard-
ware from Item J. Assemble to Item F as
shown.
Place a clamp centered at each of the
locations marked on the side rails.
Insert the upper clamp all the way into the
side rail. The 7/16" bolt must be tightened
first and then proceed to tightening the upper
bolt with the allen wrench (G) provided.
5B
D
F
6
Re-install caps removed in step 5A
The bow rests upon the top of the clamp
B
with each of its legs draped over the
sides.
The bows are marked as Bow 1, Bow 2, etc.
The location closest to the cab is bow 1.
Vehicle Equipped with Utility Tracks
D
J
Vehicle Not Equipped Utility Tracks
PAGE 4 of 8
See Note
J
G
C
F
B
1703142E
Rev.2
7/16"