Venga VG MW 3000 Mode D'emploi page 7

CLEANING
• Before cleaning, unplug and wait for the appliance to cool down.
• Wipe the outside only with a slightly moistened cloth ensuring that no moisture, oil or
grease enters the cooling slots.
• Wipe the inside and the edges of the plate with a paper towel or a soft cloth.
• Do not clean the inside or outside with any abrasive scouring pad or steel wool as
this will damage the finish.
• Do not immerse in water or any other liquid.
•
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EU
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
the rating label or on the packaging, your appliance should not be disposed of as
unsorted municipal waste. The user has the right to bring it to a municipal collection point
performing waste recovery by means of reuse, recycling or use for other applications in
accordance with the directive.
ERP DECLARATION – REGULATION 1275/2008/EC
We, TKG Sprl/Bvba, hereby confirm that our product meets the requirements of regulation
1275/2008/EC. Admittedly, our product does not dispose of a function to minimize the
power consumption, which should according to regulation 1275/2008/EC put the product
in off or standby mode after finishing the main function, but this is practically impossible,
as it would compromise the main function of the product so strongly, that using the
product would no longer be possible!
For this reason we always tell the customer in our instruction manual to unplug the
appliance immediately after use.
The user manual is by simple request also available in electronic format from the after-
sales service.
7
on
VG MW 3000