Beko CEG5311X Mode D'emploi page 18

5
Cleaning
2
1
Pull down the service door and remove it.
When lights up stably, it indicates that the brewer is missing / installed improperly. When
is flashing, it indicates that the service door is missing/installed improperly.
5.2 Self-Cleaning
WARNING: Please wait for finishing the self cleaning process and then switch off the
machine.
When is flashing, it indicates that the appliance needs to undergo self-cleaning. The appliance
will remain in the best condition if this function is performed at least once a month or more regularly
depending on the hardness of water used. It is also suggested that to
1. Fully fill the water tank.
2. Add one pack of cleaning agent into the water tank.
WARNING: Do not use vinegar or other cleaning agent to do self-cleaning of this
appliance. The cleaning agent might damage the appliance.
3. Plug in the appliance.
4. Place a sufficient large container under the coffee spout.
5. In standby condition, press and hold
will be heard with
18 / EN
Press the release knob.
and strong espresso button
and strong espresso button
Remove the brewer. Wash the brewer
with fresh water. Dry the brewer after-
wards.
will be flashing.
Fully Automatic Coffee Machine / User Manual
for 5 seconds. A beep sound