Technical Specifications - Midland 210 DS Mode D'emploi

TECHNICAL SPECIFICATIONS

RECEIVER
Frequency coverage* ..........................................from 26.565 to 27.99125 MHz
Sensitivity ..................................................... better than 1.0 μV for 20 dB SINAD
Adjacent Channel Rejection ......................60 dB at 10 kHz; 70 dB for 20 KHz
Intermediate Frequency .............................1st IF=10.7 MHz; 2nd IF=455 KHz
Audio Output power ............................................................................. 4 watts max
Frequency Response (-6dB) .................................................... 6 dB: 450-2500 Hz
Squelch .............................................................adjustable from 0,5 μV to 150mV
TRASMITTER
Frequency coverage ............................................from 26.565 to 27.99125 MHz
Duty cycle............................................................................................................. 5/5/90
Output Power .......................................................................................................1/4 W
Type of modulation .........................................................................................AM/FM
Max Deviation ..........................................................................2.0 KHz FM; 80% AM
Spurious Radiation ........................................................................... 62 dB or better
Frequency Tolerance .......................................................................................0.002%
Power supply ......................................................................................12,6 Vdc ±10%
Current Drain ............................................................................ FM: 1.3 A; AM: 1.8 A
Dimensions ......................................................................................124x38x190 mm
Weight .................................................................................................................... 1.2 kg
All specifications are subject to change without notice.
* (covering all approved EU frequency bands)
A readily accessible disconnect device shall be incorporated in the installation wiring.
The disconnect device shall disconnect both poles simultaneously.
Hereby, CTE International declares that Midland 210 DS is in compliance with the essen-
tial requirements and other relevant provisions of Directive 99/05/EC.
8 | Midland 210 DS Instruction Guide