Doro PhoneEasy 311C Mode D'emploi page 5

Storing One-touch Memories
1. Lift the handset, press and release
earpiece).
2. Select a memory location M1, M2 or M3 by pressing the corresponding
button.
3. Enter the telephone number to be stored (up to 21 digits).
4. Press and release
5. Replace the handset. The number is now stored.
Dialling using One-touch Memories
1. Lift the handset and wait for a dialling tone.
2. Select a memory location by pressing the corresponding memory
button (M1, M2 or M3). The stored number will now be dialled.
Storing Two-touch Memories
1. Lift the handset, press and release
earpiece).
2. Press and release
3. Select a memory location by pressing one of the keypad number
buttons 0 - 9 .
4. Enter the telephone number to be stored (up to 21 digits).
5. Press and release
6. Replace the handset. The number is now stored.
Dialling using Two-touch Memories
1. Lift the handset and wait for a dialling tone.
2. Press and release
3. Select a memory location by pressing the relevant keypad number
0 - 9 . The stored number will now be dialled.
Press and release
r
or number stored in memory can then be entered on the memo list if wished. If a stored
number changes, follow the procedures above entering the new number in the same location
as the old one.
Earpiece Volume control
During a conversation press and release either
decrease the earpiece volume.
English
again.
P
.
m
again.
P
.
m
if you need to insert a pause in a telephone number. The name
(ignore anything you hear in the
P
(ignore anything you hear in the
P
to increase or
v
2
to
V