Vornado AC300 Manuel D'utilisation page 10

Filter Replacement
4. Remove and discard used Filters. Simply take hold of the
Carbon Filter at any place along the perimeter and remove.
To remove the HEPA Filter, take hold of the tab (Figure 1)
and pull to release. Replace with genuine Vornado Filters.
Place the Filters in the unit and gently press around the pe-
rimeter of the Filter to ensure secure placement (Figure 2).
Fig. 1
10 English
Fig. 2
5. Replace the Plastic Support Filter Frame by securing the
bottom 2 tabs into bottom slots (B). Slightly flex the Plastic
Support Filter Frame to secure the top 2 tabs into the top
slots (A).
A
B
A
A
A
A
B
B
B
B