Table des Matières
Publicité
Manual Access Point SAnR/SAtc
Explosionproof Access Point SAnR/SAtc
Contents:
1.
Safety rules
2.
3.
4.
5.
6.
Servicing and Maintenance
7.
Target group
Experienced qualified electricians in accordance
with the occupational health and safety decree
and trained persons.
1.
Safety rules
The explosionproof access points are used for
stationary installation in hazardous areas classi-
fied as zones 2 and 22.
Do not leave this Manual or any other object
inside the enclosure when the unit is in service.
Operate the explosionproof access points only
for their intended duty when in an undamaged
and clean condition, and only where the material
of the enclosure is compatible with the environ-
ment.
In the event of incorrect assembly, the minimum
ingress protection IP 66 to IEC 60529 will no
longer be assured.
NOTE
The safety of any system incorporating the equipment
is the responsibility of the assembler of the system.
No modifications that are not expressly spe-
cified in this Manual are allowed to the explo-
sionproof access points.
If the equipment is used in a manner not spe-
cified by the manufacturer, the protection
provided by the equipment may be impaired.
The access point SAnR/SAtc may only be
used indoors.
Whenever work is done on the explosion-
proof access points, the national safety and
accident prevention regu lations and the safe-
ty instructions given in this Manual (stated in
Edition June 2021
Copyright
thuba Ltd., CH-4002 Basel
Switzerland
3
Publicité
Table des Matières
