Rockwell Automation Allen-Bradley PanelView 550 Instructions D'installation page 4

2 PanelView 550/600 Touch Screen Terminals
European Union Directive Compliance
If a PanelView 550/600 touch screen terminal is installed within the European
Union or EFTA regions and has a CE mark, the following regulations apply.
This apparatus is tested to meet directives:
• EMC Directive 89/336/EEC Electromagnetic Compatibility (EMC) and
ammending directives 92/31/EEC, 93/68/EEC
• Low Voltage Directive 73/23/EEC and amending directive 93/68/EEC
Using the following standards, in whole or in part:
• EN 50081-2:1993 EMC - Generic Emission Standard, Part 2 - Industrial
Environment
• EN 50082-2:1995 EMC - Generic Immunity Standard, Part 2 - Industrial
Environment
• EN 61131-2:1995 EMC - Programmable Controllers - Equipment
Requirements and Tests
The product described is intended for use in an industrial environment.
Intended Use of Product
According to these Standards, the factor which determines, for EMC purposes,
whether an apparatus is deemed to be "Industrial" or "Residential, commercial
and light industrial", is given in Clause 1 of EN50081-2 as follows:
Apparatus covered by this standard is not intended for connection to a public
mains network but is intended to be connected to a power network supplied
from a high- or medium-voltage transformer dedicated for the supply of an
installation feeding a manufacturing or similar plant.
The PanelView 550/600 touch screen terminal is intended for use solely in an
industrial environment as defined above. When installed in Europe, any other
application is in contravention of European Union Directives, and a breach of
these laws.
41061-109-01(B)