Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
AMIRA 50 - FUNCTIONS
When the unit is connected, a short
beep sounds and the backlight of the
buttons lights up briefly.
The unit enters standby mode.
LED light on / off
With the
button you can switch the
illumination of the hood on and off in
any mode / operating state.
On / Off
Press the
ibutton in standby mode to
turn on the unit.
The backlighting of the buttons will
indicate the operating mode and
the appliance will start working.
In the operating mode you can inter-
rupt the operation by briefly pressing
the key (
key remains illuminated)
and switch off the appliance by hol-
ding it down (all key illuminations off).
Setting the power level
The appliance has three power levels
and one high-performance level
(booster).
After switching on, operation starts at
the first power level.
Now use the
key to increase the
power and the
key to decrease it.
The flashing of the key illumination
and
displays the status:
Level 1: 2 sec. frequency
Level 2: 1.5 sec. frequency
Level 3: 1 sec. frequency
5minute timer / Automatic switch-off
If the and
and
simultaneously during opera-tion, the
5min. automatic switch-off is activated.
The illumination of the
the
and
keys light up.
After 5 minutes, a beep sounds and the
appliance automatically switches to
standby mode.
You can deactivate the 5-minute timer
by pressing the and
simultaneously again during the
countdown.
keys are pressed
flashes and
and
keys
Publicité
Table des Matières
