Thermador T24UR820DS Guide D'installation page 18

5. When the hooks are completely inside the slots, push the overlay down; the hooks will now
secure the position of the overlay on the drawer.
Push the overlay down
6. Remove the gasket from the top corners of the door pulling it gently until the hole shown is
visible. It is not necessary to remove all the gasket, only a portion enough to make the hole
accessible.
Using the screws included in the "installation kit" (one per corner), secure the overlay panel
screwing it from the inside of the drawer until the panel is firmly attached to the drawer.
The overlay will slide down and
the hooks will secure its position
Secure the overlay using the
screws included in the
"installation kit". There must be
one per corner.
Page | 18