Medion S49014 Mode D'emploi page 98

 Wait until the camera has saved its last photos/videos
and has then switched on.
12.4.2. The camera will not take photos.
• The camera is still in test mode.
• The memory is full.
• The SD card is not correctly formatted or is defective.
12.4.3. The image is blurred.
• The subject moved very quickly.
• The subject was outside the camera's focal range.
 Improve the light conditions and check the shooting
area in test mode.
12.4.4. The image is not shown on the display.
• An SD card has been inserted which has been used to
take pictures in non-DCF mode on another camera. The
camera cannot display this type of image.
12.4.5. The camera switches itself off.
• The batteries are flat.
 Replace the batteries.
12.4.6. The photo/video has not been saved.
• The memory card is full.
12.4.7. The photos/videos cannot be
transferred to the PC via the USB cable.
• The camera is not switched on.
DE
EN
FR
NL
97 of 208