Time-Lapse - Medion S49014 Mode D'emploi

 Move to the next field with the  button. Press the
/ buttons again to set the minutes for the start of
the active phase.
 Move to the next field with the  button. Press the
/ buttons to set the hour for the end of the active
phase. Move to the next field with the  button. Press
the / buttons to set the minutes for the end of the
active phase.
 Confirm your selection by pressing the OK button. Then
press the MENU button to close this submenu.
NOTICE!
The settings entered here apply every
day. The camera will not take any photos/
videos outside of the active phase.

8.11. Time-lapse

Set the time-lapse function here for taking photos. If the
time-lapse function has been activated, the camera will
continue to take photos at a set time interval until either
the memory is full, the battery is empty or the process is
manually ended.
The interval can be freely selected:
 Press the / buttons to set the hour for the desired
time interval.
 Move to the next field with the  button. Press the
/ buttons again to set the minutes for the desired
time interval.
DE
EN
FR
NL
87 of 208