Sensitivity Motion Sensors; Target Recording Time - Medion S49014 Mode D'emploi

8.9.

Sensitivity motion sensors.

The sensitivity of the front motion sensor can be set here.
In the case of indoor recordings and environments with very
little interference (such as branches that move in the wind),
use the High setting.
Use the Middle setting for recording in an environment with
normal interference and the Low setting for environments
with lots of interference.
The ambient temperature can also influence the sensitivity
of the motion sensor. High is more suited to warm
environments, while the Low setting is more recommended
for cold environments.
NOTICE!
The default setting here is Middle. Setting
the sensitivity to High increases the
probability that the camera is triggered
inadvertently. The Low setting can lead to
small animals remaining undetected.

8.10. Target recording time

Select ON if you only want the camera to be active for a
certain period of time. In the menu that is subsequently
displayed on the screen, you can then set the start and end
times for the active phase:
 Press the / buttons to set the hour for the start of
the active phase.
86 of 208