Safety Information - Safety 1st 49533 Mode D'emploi

Safety 1st Baby's 1st Digital Thermometer
Please read the instructions carefully to ensure accurate temperatures and safe operation.
When used properly, this high quality product will give you years of accurate, dependable
service.

SAFETY INFORMATION:

High, prolonged fever requires medical
attention especially for young children. Please
contact your physician.
Do not allow children to take their
temperatures unattended.
Read the enclosed instructions carefully to ensure accurate temperature readings. Temperature
readings are affected by many factors including exercise, drinking hot or cold beverages prior to taking
a reading as well as technique.
Do not allow children to walk or run during temperature taking. The probe could present a
hazard.
Oral, underarm, and rectal temperatures vary by approximately 0.9°F/0.5°C.
SPECIAL PRODUCT FEATURES:
Fast 40-second Rectal readings! 60-Second
Oral and Underarm readings.
Flexible tip with over insertion gauge for
added comfort and safety.
°F (or °C) Stops flashing when reaches highest
temperature.
Memory recall of last reading.
Automatic shut-off after approximately 10
minutes for longer battery life.
Long Life, Non-replaceable battery
(approximately 3000 temperatures).
Low Battery Indicator " M ".
Water Resistant probe.
WHAT IS A "NORMAL" TEMPERATURE?:
Temperature readings vary in different individuals. A normal temperature refers to each individual's
average temperature while they are well. Normal average temperatures range from 97°F/36.1°C to
100°F/37.7°C when taken orally. See "RECTAL USE" and "UNDERARM (AXILLARY) USE" for the oral
equivalent of a rectal or underarm reading.
HOW TO TAKE TEMPERATURE:
1
Select oral, underarm or rectal as your measurement site based on the individual requiring a
temperature measurement. If you wish to use a thermometer cover, please follow usage instructions
on page i.
2
Push the on-off button located beside the display window. The display will read: "188.8°F
This is a function check indicating the unit is working properly.
If you choose to recall the last measured temperature, hold the on-off button down for two seconds,
and the last temperature will be displayed on the screen for two seconds. The thermometer will
read -- - °F (or -- - °C) and begin measuring temperature when exposed to body heat.
3
The °F (or °C) symbol will continuously flash until completion of the temperature taking process.
Please note that the "t" indicates a low battery. An "ERR" message in the window indicates your unit
is not functioning properly. Do not expect an accurate temperature reading if this low battery
indicator is present. Out-of-range indicator displays "L" when measurement is lower than 90.0°F
and "H" when higher than 109.9°F.
4
When peak temperature is reached, the °F (or °C) symbol will stop flashing.
5
Read and record the temperature and time for reference. The reading will automatically be
stored in the memory.
6
Push the on-off button to turn the unit off. If you do not turn the unit off, it will shut off
automatically in approximately 10 minutes.
6
All manuals and user guides at all-guides.com
Over insertion gauge
on-off display
button window
HOW TO CARE FOR THIS PRODUCT:
Clean the thermometer tip and probe using
isopropyl alcohol or soap and water. Do not
immerse in water.
Store the unit in the protective case while not
in use.
Do not store or keep in direct sunlight, or in
high temperatures.
To avoid damage to probe do not bend
beyond 45° (as shown in above diagram).
Do not drop the thermometer, as this may
ruin the unit.
To avoid damage to flexible
tip do not bend beyond 45°
angle as shown.
M
M