Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
- Connect to properly polarized outlets
only.
- This heater is not intended for use with
an extension cord or outlet strip. Plug
the cord directly into an appropriate
wall receptable.
- Check that neither the appliance nor
the power cable have been damaged in
any way during transportation.
- Make sure that no pieces of polystyrene
or other packaging material have been
left on the appliance.
It may be necessary to pass over the
appliance with a vacuum cleaner.
- When switching on the appliance for
the first time, allow it to run at full
power for at least two hours to get rid
of the unpleasant smell.
Make sure that the room in which the
appliance is located is well ventilated
during this operation. It is normal for
the appliance to emit small cracking
sounds when you turn it on.
- Do not use the appliance in rooms with
a floor area of less than 4m² (43 square
feet).
- Before putting the appliance away,
make sure it is completely off and
unplugged from the outlet. Wrap the
cable around the base.
Do not store in dusty atmospheres.
- Do not rest anything on the appliance.
- Do not obstruct the air intake and outlet
grilles (danger of overheating).
- Do not place the heater near a bed
because objects such as pillows or
blankets can fall off the bed and be
ignited by the heater.
- This appliance is not intended for use
at altitudes exceeding 2000 m (6561
feet).
- A tip over safety device turns the
appliance off if it falls over or is
positioned inappropriately in such a
way as to jeopardise safety.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
ONLY
Your product is equipped with a polarized alternating
current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
DESCRIPTION
A
Power indicator light
B
ON/OFF button
C
+/- adjustment buttons
D
MODE button (selects the operating mode)
E
"ECO plus" button
F
Timer button
G
handle
H
air outlet grill
General instructions
Remove the appliance from the packaging.
Check that neither the appliance nor the power cable has
been damaged during transport. Do not operate the heater if
damaged. Remove all publicity material from the appliance.
The appliance is suitable for free-standing or wall-mounted
usage. Feet must be removed before wall mounting.
Electrical connection
-
Before connecting the appliance to the power socket,
check that the voltage indicated on the appliance rating
plate is the same as your electrical system and that it can
support the power consumption (wattage) indicated.
-
If more than one appliance is used at the same time, it is
important to ensure that the electrical system is able to
support the power required.
12
Publicité
Table des Matières
