Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Introduction
The MSW Votec 322 is a Swiss two-seat low-wing monoplane
based on the Rihn DR-107 One Design and is designed for
amateur construction by MSW Aviation of Wohlen.
The brand new aerobatic model from FMS, the Votec 322 is
here! The aircraft adopts a streamlined fuselage design and
scaled Hamilton color scheme. Built with a hollow wing design,
carbon fiber tubes, pre-installed precision ball links and rods,
the Votec 322, delivers an enhanced 3D performance. The
high torque 30G servos ensure large control surface throw for
more aerobatic maneuver.
Wing tip side force generators can dramatically improve yaw
authority and keep the aircraft "locked-in" during aerobatic
maneuvers, especially in knife-edge orientation.
The Votec 322 also features a wooden propeller, for high
strength and efficiency, a first for the FMS line. Experience an
unparalleled 3D flight performance with the new Votec 322
from FMS!
Key Features:
• Powerful 4258-KV550 motor, Predator 70A ESC
• High torque coreless 30G digital metal gear servos
• High-strength,high-efficiency wooden propeller
• Carbon fiber tubes for strength
• Hollow-wing for weight control
• Pre-installed, newly designed ball link style control horns for
more throw
• Screw-together construction
• No gluing
Contents of Kit
Before assembly, please inspect the contents of the kit. The
photo below details the contents of the kit with labels.
If any parts are missing or defective, please identify the
name or part number (refer to the spare parts list near the
end of the manual) then contact your local shop or email us:
support@fmsmodel.com
Specifications
Wingspan: 1400mm(55.1in)
Overall length: 1490mm(58.66in)
Flying weight: ~ 2600g (91.7oz)
Motor size: Brushless 4258-KV550
Wing load: 62.9 g/dm²(0.14oz/in²)
Wing area: 40.2 dm²(623.1 sp.in)
ESC: 70A
Servo: 30g Servo x 4
Table of Contents
···························································
Kit contents
···························································
····················································· 04
···················································
Connectors diagram
················································
···················································
Center of gravity(CG)
············································
···················································
·····················································
A.
B.
C.
G.
H.
A: Fuselage
B: Main Wing Set
C: Horizontal Stabilizer
D: Vertical Stabilizer
E: Landing Gear Set
F: Vortex Generator
3
·······································
························
································
··········································
···························
············································
············································
D.
E.
F.
I.
J.
G:Tubes
H:Propeller
I: Spinner Set
J: Linkage Rods and Screws
(7-HKM 3.0*26 ) (4-HKM 3.0*16 )
(1-HKM 3.0*20 ) (1-HKM 3.0*40 )
03
03
06
06
07
07
07
08
08
08
08
09
09
10
10
Publicité
Chapitres
Table des Matières
Dépannage
