Stand Installation - Fox Spirit FQ270 Guide D'utilisation

Stand installation

1. Take out the whole machine (with styrofoam) and place it on the horizontal table.
2. Lock the chassis on the bracket and screw it on by hand ( the hand screw is already
attached in the chassis,1 x Handscrew).
Buckle the assembled bracket chassis on the whole machine (insert the upper part
and press down). If you want to remove the bracket chassis, push the quick click
button on back cover to remove stand.
( Noted: the hand screw is already attached in the chassis).
3. Grab the stand and carefully straight up the assembled monitor on the table.
Make sure the monitor is laid on a flat surface before removing the stand.
Quick click button
1 x Handscrew
ENG-9