Specific Safety Rules And Symbols - Metabo HPT R 18DSAL Instructions De Sécurité Et Mode D'emploi

English
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed.
Use of the power tool for operations
diff erent from those intended could result
in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger
specifi ed by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fi re when
used with another battery pack.
b) Use power tools only with specifi cally
designated battery packs.
Use of any other battery packs may create
a risk of injury and fi re.
c) When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another.
Shorting the battery terminals together
may cause burns or a fi re.
d) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
fl ush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a
qualifi ed repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
4
SPECIFIC SAFETY RULES AND
SYMBOLS
1. Do not put your hands or face near the
cleaner opening during use.
Doing so might lead to injuries.
2. Do not block the cleaner opening or intake.
Blocking the cleaner opening will cause
an increase in the motor rotation speed
abnormally and might damage the vanes on
the inner section of the unit or cause injuries.
The motor might also overheat and cause a
fi re.
3. Do not use in locations where infl ammable
materials such as lacquer, paint, benzene,
thinner or gasoline are present. Also do not
let items such as lighted cigarette butts be
suctioned inside at such locations.
Explosion or fi res might result.
4. If you notice the unit is operating poorly
or making abnormal noises, immediately
stop using and shut off the power switch.
Request an inspection and repair from the
dealer where you purchased the unit or a
metabo HPT Authorized Service Center.
Continuing to use while operating abnormally
might cause injuries.
5. If the unit is mistakenly dropped or
strikes another object, make a thorough
check of the unit for cracks, breakage or
deformation, etc.
Injuries might occur if the unit has cracks,
breakage or deformation.
6. Do not use near objects generating high
heat such as stoves.
Fires might occur if used near such locations.
7. Make a thorough inspection if using the
cleaner to clean viscous powder or dust
particles.
Powder or dust particles might be suctioned
in and adhere internally, causing the vanes to
break or injuries to occur.
8. Do not leave on locations such as benches
or fl oors while still rotating.
Injuries might occur.
9. ALWAYS wear ear protectors when using
the cleaner for extended periods.
Prolonged exposure to high intensity
noise can cause hearing loss.