"Double Action" shaving system
You now own an excellent Philishave shaver featuring
the unique "Double Action" shaving system:
Each cutter blade has a "lifter blade"....
...which lifts the hair...
...before the cutter blade removes it.
The result: a very close shave indeed!
General description
A
Shaving unit with three shaving heads. Each shaving
head consists of a guard and a cutter.
B
Green pilot light. The light comes on when connecting
the shaver to the mains supply (for charging or shaving
directly from the mains).
The light starts blinking as soon as the shaver is fully
charged.
C
On/Off switch. The shaver is prevented from being
switched on accidentally by the locking device
incorporated in the switch.
On: keep the locking knob pressed-in and slide the
switch upwards.
Off: slide the switch downwards.
D
Mains cord. Using the mains cord you can operate the
shaver on any mains voltage between 100 and
240 Volts AC (charging and shaving).
E
Connector. When using the mains cord insert the small
plug firmly into the connector up to the indication mark.
F
(Type HS 860 only:) Comfort control for adjustment to
skin sensitivity.
Start with the position for the most sensitive skin (arrow
at the lowest figure) and then try successive positions to
find the one that suits you best.
G
Trimmer. The trimmer can be switched on whilst the
motor is running.
- Switch on by pushing the slide (g) upwards.
- Switch off by moving the slide downwards.
(fig. 5)
5
(fig. 1-4, page 3)
(fig. 1)
(fig. 2)
(fig. 3)
(fig. 4)