ROBLIN Cubix Centrale 600 Manuel D'instructions page 13

CLEANING METAL SELF- SUPPORTING GREASE FIL-
Alarm signal reset
• Switch off the lights and extractor motor.
• Press button T3 for at least 3 seconds, until the leds
start to flash.
Cleaning the filters
• The filters are washable and must be cleaned when
the LED S1 lights up or at least every 2 months of
operation, or more frequently for particularly heavy
usage.
• Remove the filters one at a time by pushing them to-
wards the back of the group and pulling down at the
same time.
• Wash the filters, taking care not to bend them. Allow
them to dry before refitting.
• When refitting the filters, make sure that the handle
is visible on the outside.
EN
Grease filters
TERS
2
26
6