Delivery Includes; Proper Intended Use; Safety Instructions; Signs And Symbols - ANSMANN HD250RS Mode D'emploi

DELIVERY INCLUDES

1. Lamp
2. USB to Micro-USB cable
Unpack all parts and check that everything is there and that nothing is damaged. Do not
use damaged products. If you find damage on the product, contact your dealer/retailer.

PROPER INTENDED USE

The device serves as a mobile head light
§ The lamp is not intended for any other applications
§ Not suitable for household room lighting
§ The product is not intended for commercial use

SAFETY INSTRUCTIONS

These operating instructions contain important information for the first use normal
operation of the following product:
The following text refers to the sensor head lamp simply as the lamp or the product.
Read this manual carefully before using the lamp for the first time and proceed
accordingly.
Keep these operating instructions for future use or for the reference of future users.
Failure to follow the operating instructions and safety instructions may result in
damage to the product and hazards (injuries) for the operator and other persons.
The operating instructions refer to applicable standards and regulations of the Euro-
pean Union. Please also adhere to the laws and guidelines specific to your country.

SIGNS AND SYMBOLS

Please take note of the following symbols and words used in the operating inst-
ructions, on the product and on the packaging.
Information
Useful additional information about the product
Caution
The caution warns you of possible damage of all kinds
Warning
Attention – Danger! May result in serious injury or death
Deutsch | English | Français | Español | Português | Svenska
10
Italiano | Nederlands | Dansk | Suomi | Norsk

OBSERVE SAFETY INSTRUCTIONS!

Avoid eye injuries - Never look directly into the beam of light or shine it into other
people's faces. If this occurs for too long, the blue light portion of the beam can
cause retinal damage. If the light beam shines into the eyes, close the eyes and
turn the head away from the light beam.
This lamp exceeds the conditions for risk-free use. The risk when using it depends
on how the user handles the lamp.
§ Do not open or modify the product! Repair work and replacement of the rechargeable
battery pack shall only be carried out by the manufacturer or by a service technician
appointed by the manufacturer or by a similarly qualified person.
§ Keep the product and the packaging away from children. This product is not a toy. Chil-
dren should be supervised in order to ensure that they do not play with the product.
§ This product is not to be used by persons (including children) who have restricted physical,
sensory or mental capabilities or who do not have adequate experience and knowledge in
handling this product. Such persons must be instructed beforehand by a supervisory person
who is responsible for their safety or must be supervised during the use of the product!
§ The LED light source cannot be replaced. When the LED comes to the end of its
service life, the complete lamp must be replaced
§ All illuminated objects must be at least 10cm away from the light!
§ The lamp may only be used in accordance with the intended use.
§ This product is not a toy to be played with.
§ Keep out of the reach of children!
§ Failure to observe the safety instructions can result in dangerous injuries to per-
sons or damage to the device!
§ The operating instructions for devices to which the USB connection will be connec-
ted must also be read
§ Always keep the product dry
ATTENTION
§ Do not throw the product into a fire!
§ The product may only be charged in closed, dry and spacious rooms, away from
combustible materials and liquids. Disregard can result in burns and fires.
§ Never open, crush or heat a rechargeable battery or set it on fire.
§ Do not use the product in potentially explosive areas or in the rain and do not
expose it to excessive heat.
§ Do not use the product if it appears to be damaged
Deutsch | English | Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk
11