Power Supply - Festo CPA-SC-DP Brève Description

Power supply

Nominal value
Tolerance
Residual ripple
Pin 1: electronics
(and CP sensors)
Pin 2: valves
(and CP outputs)
Protection against
electric shock
Electrical isolation
Field bus interface opto−uncoupled from the power supply
connection
Power supply: pin 1 electrically isolated from pin 2
26
24 V DC (protected against incorrect
polarity, fused internally, automatic restart)
21.6 ... 26.4 V
4 Vpp (within tolerance)
Current consumption: max. 200 mA
+ current consumption of the sensors
Current consumption: Sum of all
switched−on CP solenoid valves.
(see manual CP pneumatics") and CP
outputs (if not with their own power
supply)
By the use of PELV current circuits
(protection against direct and indirect
contact as per IEC/DIN EN 60204−1)
Festo CPASC−DP 0610NH English