Power Inverter; Important Safety Instructions - Schumacher Electric PI-140 Guide D'utilisation

Power Inverter

OWNERS MANUAL
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE.
This manual will explain how to use the inverter safely and effectively.
Please read and follow these instructions and precautions carefully.
1. IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
1.1 SAVE THESE INSTRUCTIONS. This manual will show you how to use your inverter
safely and effectively. Please read, understand and follow these instructions and
precautions carefully, as this manual contains important safety and operating instructions.
WARNING: The inverter output is 120V AC and can shock or electrocute the same
as any ordinary household AC wall outlet.
1.2 Keep out of reach of children.
1.3 For the most effective use, place the power inverter on a flat surface.
1.4 Keep the inverter well ventilated in order to properly disperse heat generated while
it is use. Make sure there are several inches of clearance around the top and sides
and do not block the slots of the inverter.
1.5 Make sure the inverter is not close to any potential source of flammable fumes
or clothing.
1.6 Do not place the inverter in areas such as battery compartments or engine
compartments where fumes or gases may accumulate.
1.7 Keep the inverter dry. DO NOT allow the inverter to come into contact with rain
or moisture.
1.8 DO NOT operate the inverter if you, the inverter, the device being operated or any
other surfaces that may come into contact with any power source are wet. Water and
many other liquids can conduct electricity, which may lead to serious injury or death.
1.9 Do not place the inverter on or near heating vents, radiators or other sources of heat
or flammable materials.
1.10 Do not place the inverter in direct sunlight. The ideal air temperature for operation is
between 50° and 80°F.
1.11 Only connect the power inverter to a 12 volt battery or power supply. Do not attempt
to connect the inverter to any other power source, including an AC power source.
Connecting to a 6 volt or 16 volt battery will cause damage to the inverter.
1.12 Make sure the AC plug is tight.
• 4 •
MODEL
PI-140