Quax VOGUE Manuel page 31

VOGUE
51-507-xx
9. Inserting or removing the carrycot
10. Placing or removing the child seat
11. Adjusting the backrest of the carrycot
Remove the mattress. Look for the height adjustment mechanism inside the carrycot. Lift up the pvc back-
rest and locate the support beam. Place the support bar on one of the preset positions in the backrest.
Replace the mattress.
9.1 Assembling : Push the attachment hooks on each side of the carrycot
onto the housings on the frame until you hear a click. The carrycot is now
fastened.
9.2 Removing : Press the release buttons on the mounting brackets on both
sides of the carrycot while lifting the basket off the frame.
Never install the child seat with the child in the chair.
10.1 Assembling : Push the attachment hooks on each
side of the seat onto the housings of the frame until you
hear a click. The child seat is now fastened.
10.2 Use : the seat can be used in or against the direction
of travel.
10.3 Removing : Press the release buttons on the moun-
ting brackets on both sides of the child seat while lifting the
seat off the frame.
Kinderwagen Landau
Kinderwagen Pram
Quax Quax
® ®
First dreams
First steps
31