Technical Specifications - Midland G10 Guide D'instructions

Technical specifications

General
Frequency range
Working temperature
Operating voltage
Operate mode
Dimensions
Weight
Antenna impedance
Duty cycle
Transmitter
Frequency stability
Output power
Max frequency deviation
Audio distortion
Adjacent channel power
Spurious radiation
Occupied bandwidth
Receiver
RF sensibility
Audio distortion
Audio response
Adjacent channel selectivity Within European legal terms
Intermodulation rejection
Spurious response
Blocking
Hereby, CTE International declares that this G10 is in compliance with the es-
sential requirements and other relevant provisions of Directive 1999/5/EC.
WARNING: Direct plug-in ac/dc power supply must be used for disconnecting the tran-
sceiver from the mains; the desktop charger must be positioned close to the unit and
easily accessible.
Midland G10 instruction guide
446.00625- 446.09375 MHz (PMR446)
-20°/+55° C
7.4V
Simplex
100mm×58mm×33mm (without Antenna)
192g (Battery pack included)
50Ω
5/5/90%
±2.5PPM
≤500mW ERP
≤2,5KHz
≤3%
< 60 dB
Within European legal terms
Within European legal terms
<0.2UV@20 dB SINAD
≤3%
300Hz ÷ 3KHz
Within European legal terms
Within European legal terms
Within European legal terms
| 9