Swarovski COSMIC ROCK Mode D'emploi page 7

V. Chronograph
Setting Crown
A B C
D Upper pushbutton
Lower pushbutton
E
30 Minutes counter
F
60 Seconds counter
G
H Date indicator *
Hour hand
I
Second hand
J
K Minute hand
Hour counter *
L
Accumulated timing
To measure the combined time of a series
of shorter events
Push button D to start the chronograph.
01
Push button D to stop the chronograph
02
and read the elapsed time.
Push button D to resume measurement.
03
Repeat steps 2 and 3 to add each
interval of time.
To reset the chronograph hands
04
(F, G, and L) push button E.
* for select models
Intermediate or interval timing
To take intermediate time readings as
an event progresses
Push button D to start the chronograph.
01
Push button E to read the first inter-
02
mediary time. The chronograph will
continue to operate.
Push button E again and the chrono-
03
graph hands (F, G, and L) will catch up
with the elapsed time. Repeat steps 2
and 3 to take any additional split times.
To display the total elapsed time push
04
button D
To reset the chronograph hands (F, G,
05
and L) push button E.
Adjusting the chronograph (counter)
hands to Zero position
When one or several chronograph hands
are not in their correct zero positions
— Pull out the crown to position C and
press the upper and lower push-
buttons (D and E) simultaneously until
the seconds counter (G) rotates
360° (corrective mode is activated).
07