Frequency/Voltage Control - Micro-Star International 865GVM3-V Mode D'emploi

All manuals and user guides at all-guides.com
Power Management Setup
Use this menu to specify your settings for power management.
PNP/PCI Configurations
This entry appears if your system supports PnP/PCI.
PC Health
This entry shows your hardware & PC health status.

Frequency/Voltage Control

Use this menu to specify your settings for frequency/voltage control.
Load BIOS Defaults
Use this menu to load the optimized default settings into the BIOS for the best system
performance operations.
BIOS Setting Password
Use this menu to set the password.
Save & Exit Setup
Save changes to CMOS and exit setup.
Exit Without Saving
Abandon all changes and exit setup.
Frequency/Voltage Control
CPU Clock Ratio
This item allows you to adjust the CPU ratio. Setting range is from [8] to [50].
Auto Detect PCI Clk
This item is used to auto detect the PCI slots. When set to [Enabled], the system will remove
(turn off) clocks from empty PCI slots to minimize the electromagnetic interference (EMI).
Settings: [Enabled], [Disabled].
Spread Spectrum
When the motherboard's clock generator pulses, the extreme values (spikes) of the pulses
creates EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI
13