ASROCK Z690 Phantom Gaming-ITX/TB4 Mode D'emploi page 28

ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 1)
RGB LED Header
(4-pin RGB_LED1)
(see p.1, No. 9)
Addressable LED Header
(3-pin ADDR_LED1)
(see p.1, No. 2)
24
This motherboard
8 5
provides a 8-pin ATX 12V
power connector. To use a
4 1
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics
card. Do not plug the
PCIe power cable to this
connector.
RGB header is used to connect
RGB LED extension cable which
allows users to choose from vari-
ous LED lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may be
damaged.
* Please refer to page 36 for
further instructions on this
header.
This header is used to connect
1
Addressable LED extension cable
GND
DO_ADDR
which allows users to choose
VOUT
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
* Please refer to page 37 for
further instructions on this
header.