Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Steps
After setting board on brackets,
install nuts on square head bolts,
do not tighten.
Tighten all bracket bolts.
10
Position Board for best appearance,
keep Splash Guard tight to Wheel Well.
Tighten nuts on square head bolts.
11
Drill 1/8" holes thorough Wheel Well Lip
and Splash Guard, apply Silicone to holes
after drilling. install #8x1" Black screws.
12
Page 5 of 6
10393
Rev A
Publicité
Table des Matières
