Harness System - Cosco Alpha Omega Elite 65 Mode D'emploi

C-7 Removing Harness System

Harness system

MUST be removed to use this child
restraint as a Booster Seat.
1.
Unhook Harness Straps
from Splitter Plate
Fully loosen harness straps.
Starting in the back of the child
restraint, unhook harness strap
loops from splitter plate.
2.
Store Splitter Plate
Raise headrest all the way up.
Store splitter plate by wrapping
the harness adjustment strap/
splitter plate around the center
rib as shown.
3. Remove Harness Straps
1
From the front, pull harness
2
straps through the upper
harness guides (1).
4
3
Unthread harness straps from
the chest clip (2).
Unthread harness straps from
the buckle tongues (3).
Holding one harness strap,
pull harness completely out of
lower harness guides (4).
23
4.
Locate Buckle Strap's
Metal Retainer
Fully recline the child
restraint. Reach under the
seat between base and shell.
5.
Insert Metal Retainer
Through Shell and Pad
Locate the buckle strap's
metal retainer under the
shell.
Rotate metal retainer, then
insert metal retainer up
through the shell and pad.
6.
Remove Buckle from
Child Restraint
From the front, pull buckle
strap free from shell and pad.
24