Removing Child From Child Restraint - Cosco Alpha Omega Elite 65 Mode D'emploi

C-4 Removing Child From Child Restraint
1.
Loosen Harness Straps
Push in on the harness
adjustment lever under the flap.
Pull out on harness straps just
above buckle tongues.
2.
Release Chest Clip
Push in the release button and
pull apart.
3.
Unbuckle Harness
Press down on the red buckle
release button to release the
buckle tongues. Place harness
straps over sides of child
restraint and remove the child.
19
C-5 Accessories on Select Models
Rotating Armrests
Depending on your model, you may
need to pull out on armrest to move
armrest up or down.
Infant Head Support
The infant head support is
designed to support the infant's
head and neck. Infant head
support MUST not cover the
infant's face in any way. Remove
the head support when the
infant's head has reached the
top, inside part of the infant head
support.
To remove this support, undo
the fastening strips and slide the
insert out.
Reverse steps to replace support.
Child Head Support
The child head support
provides extra comfort for your
child.
To remove this support, unhook
the harness straps from splitter
plate, pull harness straps out of the upper harness guides
and remove support. Rethread harness straps and re-hook
the harness strap loops to the splitter plate (see section
C-9). Reverse to replace the support.
20
continued on next page.