Parts List; Tools Required - Summit Treestands SU82078 Mode D'emploi

3

PARTS LIST

BOX CONTENTS
PN DESCRIPTION
82068.010 LEFT UPRIGHT
82068.020 RIGHT UPRIGHT
82068.030 PLATFORM SUPPORT
82078.100 PLATFORM
82068.200 YOKE
82068.410 TOP LADDER SECTION
82068.420 MIDDLE LADDER SECTION
82068.430 BOTTOM LADDER SECTION
82068.440 STABILIZER MALE SECTION
82068.450 STABILIZER FEMALE SECTION
82068.300 ARMREST
82068.400 FOOTREST
82068.500 LEFT GUNREST ARM
82068.550 RIGHT GUNREST ARM
82068.600 GUNREST BAR
82068.850 FOAM SEAT
82068.855 GUNREST PAD
82068.700 ACCESSORY PACKET
ACCESSORY PACKET CONTENTS
PN DESCRIPTION
82068.890 HARDWARE PACKET
82068.760 RATCHET WITH LOOP END
82068.765 PLATFORM SHORT STRAP
FOR RATCHET
82068.770 CRISS-CROSS LONG STRAP
FOR RATCHET
SU18191-16 SAFETY DVD
SU18195-A FULL BODY FALL ARREST HARNESS
SYSTEM (FBFAHS)
All images are representations. All fabric, paint and accessories are subject to change at any time. Net weights of the products
4

TOOLS REQUIRED

Tools
• 7/16" Wrenches and / or Socket / Ratchet
- Assembly can be made easier by the use of a powered ratchet or drill with socket adapter (take care not to overtighten
when using power tools to assemble)
- It is recommended that all bolts be sorted by thread count / length prior to assembly.
- Assemble entire product before fully tightening any bolts / lock nuts.
DO NOT OVER-TIGHTEN the bolts and nuts to the point that the tubing becomes deformed or bent.
PG 4
Please call 800-353-0634 or visit http://www.summitstands.com/contactus/
if you have any questions, if you need replacement parts, if you have any missing parts or if the
included DVD does not play.
QTY
1
1
2
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
QTY
1
3
1
2
1
1
are approximate.
82068.890 - HARDWARE PACKET
All bolts used are 1/4" threads, grade 5.
PN DESCRIPTION
10601 1 3/4" BOLT, 1/4"-20 Thread
10609 2 1/4" BOLT, 1/4"-20 Thread
2 3/4" BOLT, 1/4"-20 Thread
10612 LOCK NUT, 1/4"-20 Thread
1/4" WIRE LOCK PIN
1/4" BUSHINGS
RUBBER BUMPERS FOR GUNREST
QTY
11
4
2
17
3
4
2
www.summitstands.com