Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
WARNING: IT IS VERY IMPORTANT TO CHECK
AND ENSURE THAT EACH AND EVERY BURNER
IS FULLY ENGAGED WITH THE ADJACENT VALVE
ORIFICE BEFORE COMPLETING STEP 19.
FAILURE TO DO SO MAY RESULT IN FIRE OR
EXPLOSION, POSSIBLY CAUSING SERIOUS
INJURY OR DEATH. REFER TO MAINTENANCE
SECTION INSTRUCTIONS TO PROPERLY CHECK
THE ENGAGEMENT.
19.
Assemble the seven control knobs (D) to the
valve stems. Then remove the ignitor cap,
insert (AA) battery (1.5V) (K) into the ignitor
body with the positive '+' end facing out,
replace ignitor cap.
20.
Put six heat tents (G) in place over each burner.
19
D
20
16
Correct
Wrong
Wrong
K
G
G
G
Publicité
Table des Matières
