Dyna-Glo DGB610SSP Mode D'emploi page 11

ASSEMBLY INSTRUCTIONS
15. Pre-assemble two M6x16 bolts (AA) onto
15
the grill body assembly (C) and do not tighten
them. Make sure to leave a 5mm gap between
C
the bolt and grill body's end cap. Then hang
the left side table assembly (J) on the bolts
and fasten the left side table assembly (J) with
three M6x16 bolts (AA) and tighten all bolts.
J
Hardware Used
AA
M6x16 Bolt
x 5
AA
13