Dell Online Rack UPS 3750W Démarrage page 24

Completing the Startup
Verify that the Normal icon
1
UPS is operating normally and any loads are powered.
On the UPS status summary screen, press the
2
Resolve any active alarms before continuing. See "Troubleshooting" in the Dell Network
Management Card User's Guide.
If there are no active alarms, a "No Active Alarms" message appears.
To change other factory-set defaults, see "Operation" in the Dell Network Management Card
3
User's Guide.
|
22
Installation and Startup
appears on the UPS status summary screen, indicating that the
button to check for active alarms or notices.