Publicité
Les langues disponibles
Les langues disponibles
SOLIS Thermoplus-2015-E_2015 31.03.15 11:08 Seite 59
power plug or the power adaptor are damaged
or otherwise faulty, e.g. if the flow of heat is in-
terrupted. Never attempt repairs yourself, but
take your bed warmer to Solis or a Solis ap-
proved service centre in order to get it inspected
or mechanically and electrically repaired.
4. Do not leave the power cable hanging over
table edges so that it cannot be pulled. Make
sure it does not come into contact with hot sur-
faces such as, for example, a hot plate or radia-
tor.
5. Never carry or drag the appliance by the power
cable.
6. During use the control is not allowed to lie on or
under the bed warmer or be otherwise covered.
7. Never lay the bed warmer on hot surfaces or
bring the bed warmer into contact with them.
8. Do not use the appliance outdoors.
9. Unplug the appliance when it is not in use or un-
attended. Never leave the bed warmer switched
on unattended. We recommend the use of a
residual current device (RCD safety switch) to
59
Publicité
