Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Please read all the following instructions before beginning installation.
It is recommended to follow the steps in the order indicated.
Required tool: Square screwdriver #2 (North America) or " Phillips" screwdriver (Europe)
Installing the backrest (without backpost covers)
1.
Wrap the two top adjustment straps
A around the backposts and secure
with screws.
Insert straps A through the backrest
2.
loops B and into buckles C of the
central piece.
3.
Wrap each adjustment strap D
around the backpost and into
buckles E of the central piece.
4.
Adjust the tension of each strap
individually to meet the
positioning and postural needs of
the wheelchair occupant.
5.
Insert cable ties through the lower
grommets F and fasten the backrest
to the wheelchair frame.
6.
Flip the back cover flap over the
adjustment straps.
WARNING
Do not tighten the straps excessively, this may damage the backposts.
A
B
D
F
8
Premium Backrest
A
C
B
E
D
F
Publicité
Table des Matières
