When the machine is new
the filter-holder sump may
not
be
(perpendicular
machine itself) as shown in
the figure at the side,
however this does not
effect the efficient function
of the same. After a short
period of use the sump will
gradually
settle
correct position.
Options include shower
head
gaskets
thinner (8.1 mm, part no.
WGANG01/005)
thicker (9.0 mm, part no.
WGANG01/002) than the
standard
shower
gasket (8.5 mm, part no.
WGANG01/001/B).
6.4
Depending on the quantity of coffee ground, the
aligned
appropriate filter must be as shown below to avoid that,
once the coffee has dripped out, the leftover powder
to
the
remains attached to the nozzle.
WGANF08/002/B
1 coffee cup of 5,5 gr. ÷ 6,5 gr.
Pod for 1 coffee
Barley pod for 1 dose
into
a
WGANF08/004/B
1 coffee cup of 6 gr. ÷ 7 gr.
that
are
or
WGANF08/005/B
2 coffee cups of 12 gr. ÷ 14 gr.
head
WGANF08/009/B
Double pod for 2 coffees
The filter may be recognised by the letter "C" printed
inside
Filters for coffee machine
English
57