Safety; Ce Regulation - Taurus F Serie Manuel D'utilisation

1.3.2 SAFETY

Read these safety instructions carefully. Keep this user's manual for later reference and observing
all the warnings on the product as follow.
Store the equipment according to the temperature and humidity ranges written in this manual.
If any of the following situations arises, get the equipment checked by service personnel:
The power cord or plug is damaged.
• Liquid has penetrated into the equipment;
• The equipment does not work well, or you cannot get it to work;
• The equipment has obvious signs of breakage or damage.
This manual contains all instructions for proper installation and maintenance the product you
purchased. In the box packaging all the support documentation is provided.

1.4 CE REGULATION

Our products are designed in accordance with the requirements of the Electrical Safety EU directive.
2014/35/UE – LVD LVD (Essential Health and Safety Requirement of the Low-Voltage Directive)
And Electromagnetic Compatibility OF THE EU directive2014/30/UE – EMC (Electromagnetic
Compatibility Directive) in order to affi x the CE mark, in relation to standards:
• CEI EN 60950-1 Electrical Safety
• CEI EN 55024 – CEI EN 55022 Electromagnetic Compatibility
6
• Electric shock hazard – Do not operate the machine with its
back cover removed. There are dangerous high voltages inside;
• Never open the equipment. For safety reasons, only
qualifi ed service personnel should open the equipment;
• Disconnect this equipment from any outlet before cleaning.
• Before connecting the equipment to the power outlet, make
sure the outlet is grounded according to the laws in force.
The power outlet should also be located as close as possible to
the equipment, so it can be quickly and easily unplugged.
• Put this equipment on a reliable surface during installation.
Dropping it or letting it fall could cause damage to things or
harm to people;
• Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet;
• If the equipment is not used for a long time, disconnect it from
the power source to avoid damages.
MNL204.1