Blaupunkt 5VF4X00EME Notice D'utilisation page 93

Problem
The dishes are not clean
Clouding on glassware
White spots on dishes
and glasses
Black or grey stains on
the dishes
Detergent left in the
dosing unit
The dishes will not dry.
Possible causes
Not enough detergent
added
Items are blocking
the movement of the
spray arms.
The filter combination
is not clean or not
correctly inserted into
the bottom of the
wash cabinet.
This can lead to the
blocking of the spray
arm nozzles.
Combination of soft
water and too much
detergent.
Hard water can cause
lime deposits.
Aluminium utensils
rubbed against the
dishes.
Dishes are blocking
the dosing unit.
The dishes were
loaded improperly.
The dishes were
removed prematurely.
The wrong
programme was
selected.
Use of cutlery with an
inferior coating.
43
What to do
Use more detergent or change your detergent.
Arrange the items so that the spray arms can
rotate freely.
Clean the filter and/or insert it correctly.
Clean the spray arm nozzles.
Use less detergent if you have soft water and
select a shorter wash cycle to clean
glassware.
Add more detergent.
Use a mild abrasive cleaning agent to remove
these spots.
Rearrange the dishes.
Load the dishwasher as recommended in the
instructions for use.
Do not empty the dishwasher immediately
after the wash cycle. Only unload the dishes
when the inside temperature is safe to touch.
Empty the lower basket first so that no water
drips from the upper basket.
With a short programme, the washing
temperature is lower, which reduces the
cleaning performance. Select a programme
with a long washing time.
Water drainage is more difficult with these
items. Cutlery or dishes of this type are not
suitable for cleaning in a dishwasher.