Faro Ovni 33135 Installation Et Mode D'emploi page 10

INSTRUCCIONES DE SEGURIDAD / INSTRUCTION DE SÉCURITÉ / SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA / SICHERHEITSHINWEISE /
VEILIGHEIDSINSTURCTIES / INSTRUZIONI DI SICUREZZA / Ο∆ΗΓΊΕΣ ΑΣΦΑΛΕΊΑΣ / ИНСТРУКЦИИ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
TOOLS AND MATEIALS REQUIRED
• Screw driver.
• Blade screw driver.
• Wrench or pliers.
• Step ladder.
• Wire cutter.
• Wiring supplies as required by
• electrical code
UNPACKIING YOUR FAN
A- Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever necessary, the fan
should be returned in original packaging. Remove all parts and hardware. Do not lay motor housing on its side- the decorative housing
may become bent or damaged.
B- Examine all parts. You should have the following:
1- Mounting bracket.
2- Downrod/ball assembly.
3- Ceiling canopy.
4- Fan housing with motor and built-in light.
5- Set of blades.
6- Collar cover w/reverse switch and wiring harness.
7- Parts pack containing
a- Blades attachment hardware (screws with washers for each blade)
b- Mounting bracket hardware (wire nuts, wood screws, outlet box screws/washers)
8- Glass shade.
Remote control transmitter and receiver is included. Fan can also be operated from wall mounted fan/light control instead of remote
control if desired.
PART SUPPLIED